Victron Phoenix Sine Inverter 12V 800VA -230V

This inverters allows you to power domestic equipment - requiring 230V AC - using 'leisure' or 'automotive' batteries rated at 12V DC. Victron Phoenix Inverters are built to last. They feature sophisticated full-bridge and toroidal transformer topology - which is suitable for powering sensitive electronics. They are overload, temperature, and short-circuit protected.
 
Manufacturer : Victron Energy
Output Wave Form : Pure Sine Wave
Voltage (V) : 12
Continuous Power (W) : 650
Peak Power (W) : 1500
Continuous Output Power (VA) : 800
 
Features
VE.Direct communication port 
The VE.Direct port can be connected to:
• A computer (VE.Direct to USB interface cable needed) 
• Apple and Android smartphones, tablets, MacBook’s and other devices (VE.Direct Bluetooth Smart dongle needed)
• UK Type Socket
 
Fully configurable: 
• Low battery voltage alarm trip and reset levels 
• Low battery voltage cut-off and restart levels 
• Dynamic cut-off: load dependent cut-off level 
• Output voltage 210 - 245V 
• Frequency 50 Hz or 60 Hz 
• ECO mode on/off and ECO mode sense level 
Monitoring: 
• In- and output voltage, % load and alarms 
Proven reliability 
The full bridge plus toroidal transformer topology has proven its reliability over many years. The inverters are short circuit proof and protected against overheating, whether due to overload or high ambient temperature. 
High start-up power 
Needed to start loads such as power converters for LED lamps, halogen lamps or electric tools. 
ECO mode 
When in ECO mode, the inverter will switch to standby when the load decreases below a preset value (min load: 15W). Once in standby the inverter will switch on for a short period (adjustable, default: every 2,5 seconds). If the load exceeds a preset level, the inverter will remain on. 
Remote on/off 
A remote on/off switch can be connected to a two pole connector, or between battery plus and the left hand contact of the two pole connector. 
LED diagnosis 
Please see manual for a description. 
To transfer the load to another AC source: the automatic transfer switch For our low power inverters we recommend our Filax Automatic Transfer Switch. The Filax features a very short switchover time (less than 20 milliseconds) so that computers and other electronic equipment will continue to operate without disruption.
PRODUCT CODE: PIN121801400